共计 20273 个字符，预计需要花费 51 分钟才能阅读完成。
[v_act]环境说明：[/v_act]
1、系统：CentOS最小化安装；升级软件补丁，内核和系统版本不升级；关闭SELinux和防火墙。系统安装可参考[neilian ids=595]2、软件：安装包统一放置在/usr/src目录下，安装位置统一在/usr/local目录下。并且已安装Nginx和MySQL程序
[v_act]开始安装：[/v_act]
1、安装EPEL源-阿里云
mv /etc/yum.repos.d/epel.repo /etc/yum.repos.d/epel.repo.backup #如本地不存在EPEL请忽略
mv /etc/yum.repos.d/epel-testing.repo /etc/yum.repos.d/epel-testing.repo.backup #如本地不存在EPEL请忽略
wget -O /etc/yum.repos.d/epel.repo http://mirrors.aliyun.com/repo/epel-7.repo
[root@localhost ~]# wget -O /etc/yum.repos.d/epel.repo http://mirrors.aliyun.com/repo/epel-7.repo
--2018-05-08 20:46:24-- http://mirrors.aliyun.com/repo/epel-7.repo
Resolving mirrors.aliyun.com (mirrors.aliyun.com)... 218.98.9.96, 218.98.9.101, 218.98.9.98, ...
Connecting to mirrors.aliyun.com (mirrors.aliyun.com)|218.98.9.96|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 1084 (1.1K) [application/octet-stream]
Saving to: ‘/etc/yum.repos.d/epel.repo’
100%[==================================================================================================================>] 1,084 --.-K/s in 0s
2018-03-06 20:46:24 (142 MB/s) - ‘/etc/yum.repos.d/epel.repo’ saved [1084/1084]2、安装PHP基础库和扩展库
yum install zlib-devel libxml2-devel libjpeg-devel libjpeg-turbo-devel libpng-devel libcurl-devel libxslt-devel freetype-devel gd-devel libmcrypt-devel mcrypt mhash-devel openssl-devel libicu-devel -y
[root@localhost ~]# yum install zlib-devel libxml2-devel libjpeg-devel libjpeg-turbo-devel libpng-devel libcurl-devel libxslt-devel freetype-devel gd-devel libmcrypt-devel mcrypt mhash-devel openssl-devel libicu-devel -y
Loaded plugins: fastestmirror
base | 3.6 kB 00:00:00
epel | 4.7 kB 00:00:00
extras | 3.4 kB 00:00:00
updates | 3.4 kB 00:00:00
(1/3): epel/x86_64/group_gz | 266 kB 00:00:00
(2/3): epel/x86_64/updateinfo | 919 kB 00:00:00
(3/3): epel/x86_64/primary_db | 6.4 MB 00:00:00
Loading mirror speeds from cached hostfile
* base: mirrors.aliyun.com
* epel: mirrors.aliyun.com
* extras: mirrors.aliyun.com
* updates: mirrors.aliyun.com
Package zlib-devel-1.2.7-17.el7.x86_64 already installed and latest version
Package 1:openssl-devel-1.0.2k-8.el7.x86_64 already installed and latest version
Resolving Dependencies
--> Running transaction check
---> Package freetype-devel.x86_64 0:2.4.11-15.el7 will be installed
---> Package gd-devel.x86_64 0:2.0.35-26.el7 will be installed
--> Processing Dependency: gd = 2.0.35-26.el7 for package: gd-devel-2.0.35-26.el7.x86_64
--> Processing Dependency: libXpm-devel for package: gd-devel-2.0.35-26.el7.x86_64
--> Processing Dependency: libX11-devel for package: gd-devel-2.0.35-26.el7.x86_64
--> Processing Dependency: fontconfig-devel for package: gd-devel-2.0.35-26.el7.x86_64
--> Processing Dependency: libgd.so.2()(64bit) for package: gd-devel-2.0.35-26.el7.x86_64
---> Package libcurl-devel.x86_64 0:7.29.0-42.el7_4.1 will be installed
epel/x86_64/filelists_db | 10 MB 00:00:01
updates/7/x86_64/filelists_db | 4.2 MB 00:00:00
---> Package libicu-devel.x86_64 0:50.1.2-15.el7 will be installed
---> Package libjpeg-turbo-devel.x86_64 0:1.2.90-5.el7 will be installed
......此处省略......
---> Package libXau.x86_64 0:1.0.8-2.1.el7 will be installed
--> Finished Dependency Resolution
Dependencies Resolved
============================================================================================================================================================
Package Arch Version Repository Size
============================================================================================================================================================
Installing:
freetype-devel x86_64 2.4.11-15.el7 base 356 k
gd-devel x86_64 2.0.35-26.el7 base 79 k
......此处省略......
xorg-x11-proto-devel noarch 7.7-20.el7 base 284 k
xz-devel x86_64 5.2.2-1.el7 base 46 k
Transaction Summary
============================================================================================================================================================
Install 11 Packages (+26 Dependent packages)
Total download size: 8.1 M
Installed size: 32 M
Downloading packages:
(1/37): expat-devel-2.1.0-10.el7_3.x86_64.rpm | 57 kB 00:00:00
(2/37): fontconfig-2.10.95-11.el7.x86_64.rpm | 229 kB 00:00:00
......此处省略......
(36/37): xorg-x11-proto-devel-7.7-20.el7.noarch.rpm | 284 kB 00:00:00
(37/37): xz-devel-5.2.2-1.el7.x86_64.rpm | 46 kB 00:00:00
------------------------------------------------------------------------------------------------------------------------------------------------------------
Total 3.2 MB/s | 8.1 MB 00:00:02
Running transaction check
Running transaction test
Transaction test succeeded
Running transaction
Installing : libXau-1.0.8-2.1.el7.x86_64 1/37
Installing : libxcb-1.12-1.el7.x86_64 2/37
......此处省略......
Verifying : libgpg-error-devel-1.12-3.el7.x86_64 36/37
Verifying : libXau-devel-1.0.8-2.1.el7.x86_64 37/37
Installed:
freetype-devel.x86_64 0:2.4.11-15.el7 gd-devel.x86_64 0:2.0.35-26.el7 libcurl-devel.x86_64 0:7.29.0-42.el7_4.1
libicu-devel.x86_64 0:50.1.2-15.el7 libjpeg-turbo-devel.x86_64 0:1.2.90-5.el7 libmcrypt-devel.x86_64 0:2.5.8-13.el7
libpng-devel.x86_64 2:1.5.13-7.el7_2 libxml2-devel.x86_64 0:2.9.1-6.el7_2.3 libxslt-devel.x86_64 0:1.1.28-5.el7
mcrypt.x86_64 0:2.6.8-11.el7 mhash-devel.x86_64 0:0.9.9.9-10.el7
Dependency Installed:
expat-devel.x86_64 0:2.1.0-10.el7_3 fontconfig.x86_64 0:2.10.95-11.el7 fontconfig-devel.x86_64 0:2.10.95-11.el7
fontpackages-filesystem.noarch 0:1.44-8.el7 gd.x86_64 0:2.0.35-26.el7 libICE.x86_64 0:1.0.9-9.el7
libSM.x86_64 0:1.2.2-2.el7 libX11.x86_64 0:1.6.5-1.el7 libX11-common.noarch 0:1.6.5-1.el7
libX11-devel.x86_64 0:1.6.5-1.el7 libXau.x86_64 0:1.0.8-2.1.el7 libXau-devel.x86_64 0:1.0.8-2.1.el7
libXext.x86_64 0:1.3.3-3.el7 libXpm.x86_64 0:3.5.12-1.el7 libXpm-devel.x86_64 0:3.5.12-1.el7
libXt.x86_64 0:1.1.5-3.el7 libgcrypt-devel.x86_64 0:1.5.3-14.el7 libgpg-error-devel.x86_64 0:1.12-3.el7
libmcrypt.x86_64 0:2.5.8-13.el7 libpng.x86_64 2:1.5.13-7.el7_2 libxcb.x86_64 0:1.12-1.el7
libxcb-devel.x86_64 0:1.12-1.el7 lyx-fonts.noarch 0:2.2.3-1.el7 mhash.x86_64 0:0.9.9.9-10.el7
xorg-x11-proto-devel.noarch 0:7.7-20.el7 xz-devel.x86_64 0:5.2.2-1.el7
Complete!3、安装libiconv：下载地址（https://ftp.gnu.org/pub/gnu/libiconv/libiconv-1.15.tar.gz），下载后存放至/usr/src目录，解压libiconv程序并进入目录编译安装
cd /usr/src/
tar -zxf libiconv-1.15.tar.gz
cd libiconv-1.15
./configure –prefix=/usr/local/libiconv
make && make install
[root@localhost ~]# cd /usr/src/
[root@localhost src]# tar -zxf libiconv-1.15.tar.gz
[root@localhost src]# cd libiconv-1.15
[root@localhost libiconv-1.15]# ./configure --prefix=/usr/local/libiconv
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
......此处省略......
checking whether usleep is declared without a macro... yes
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
......此处省略......
configure: creating ./config.status
config.status: creating Makefile
config.status: executing libtool commands
[root@localhost libiconv-1.15]# make && make install
builddir="`pwd`"; cd libcharset && make all && make install-lib libdir="$builddir/lib" includedir="$builddir/lib"
make[1]: Entering directory `/usr/src/libiconv-1.15/libcharset'
......此处省略......
case "linux-gnu" in \
hpux*) gcc -g -O2 `if test -n ''; then /usr/local/libiconv/bin; fi` iconv.o ../srclib/libicrt.a -L/usr/local/libiconv/lib -liconv `if test -n ''; then echo " -Wl,+b -Wl,/usr/local/libiconv/lib"; fi` -o iconv;; \
*) /bin/sh ../libtool --mode=link gcc -g -O2 `if test -n ''; then /usr/local/libiconv/bin; fi` iconv.o ../srclib/libicrt.a /usr/local/libiconv/lib/libiconv.la -o iconv;; \
esac
libtool: link: gcc -g -O2 iconv.o -o iconv ../srclib/libicrt.a /usr/local/libiconv/lib/libiconv.so -Wl,-rpath -Wl,/usr/local/libiconv/lib -Wl,-rpath -Wl,/usr/local/libiconv/lib
/bin/sh ../libtool --mode=install /usr/bin/install -c iconv /usr/local/libiconv/bin/iconv
libtool: install: /usr/bin/install -c iconv /usr/local/libiconv/bin/iconv
make[1]: Leaving directory `/usr/src/libiconv-1.15/src'
if [ ! -d /usr/local/libiconv/include ] ; then /bin/sh ./build-aux/mkinstalldirs /usr/local/libiconv/include ; fi
/usr/bin/install -c -m 644 include/iconv.h.inst /usr/local/libiconv/include/iconv.h
cd po && make install prefix='/usr/local/libiconv' exec_prefix='/usr/local/libiconv' datarootdir='/usr/local/libiconv/share' datadir='/usr/local/libiconv/share'
make[1]: Entering directory `/usr/src/libiconv-1.15/po'
installing af.gmo as /usr/local/libiconv/share/locale/af/LC_MESSAGES/libiconv.mo
installing bg.gmo as /usr/local/libiconv/share/locale/bg/LC_MESSAGES/libiconv.mo
......此处省略......
installing zh_CN.gmo as /usr/local/libiconv/share/locale/zh_CN/LC_MESSAGES/libiconv.mo
installing zh_TW.gmo as /usr/local/libiconv/share/locale/zh_TW/LC_MESSAGES/libiconv.mo
if test "libiconv" = "gettext-tools"; then \
/usr/bin/mkdir -p /usr/local/libiconv/share/gettext/po; \
for file in Makefile.in.in remove-potcdate.sin quot.sed boldquot.sed en@quot.header en@boldquot.header insert-header.sin Rules-quot Makevars.template; do \
/usr/bin/install -c -m 644 ./$file \
/usr/local/libiconv/share/gettext/po/$file; \
done; \
for file in Makevars; do \
rm -f /usr/local/libiconv/share/gettext/po/$file; \
done; \
else \
: ; \
fi
make[1]: Leaving directory `/usr/src/libiconv-1.15/po'
cd man && make install prefix='/usr/local/libiconv' exec_prefix='/usr/local/libiconv' datarootdir='/usr/local/libiconv/share' datadir='/usr/local/libiconv/share' mandir='/usr/local/libiconv/share/man'
make[1]: Entering directory `/usr/src/libiconv-1.15/man'
......此处省略......
builddir="`pwd`"; cd . && for f in *.html ; do (cd "$builddir"; echo /usr/bin/install -c -m 644 ./$f /usr/local/libiconv/share/doc//$f ; /usr/bin/install -c -m 644 ./$f /usr/local/libiconv/share/doc//$f) ; done
/usr/bin/install -c -m 644 ./iconv.1.html /usr/local/libiconv/share/doc//iconv.1.html
/usr/bin/install -c -m 644 ./iconv.3.html /usr/local/libiconv/share/doc//iconv.3.html
/usr/bin/install -c -m 644 ./iconv_close.3.html /usr/local/libiconv/share/doc//iconv_close.3.html
/usr/bin/install -c -m 644 ./iconvctl.3.html /usr/local/libiconv/share/doc//iconvctl.3.html
/usr/bin/install -c -m 644 ./iconv_open.3.html /usr/local/libiconv/share/doc//iconv_open.3.html
/usr/bin/install -c -m 644 ./iconv_open_into.3.html /usr/local/libiconv/share/doc//iconv_open_into.3.html
make[1]: Leaving directory `/usr/src/libiconv-1.15/man'4、解压PHP程序并进入目录编译安装
cd /usr/src/
tar -zxf php-5.6.36.tar.gz
cd php-5.6.36
./configure \
–prefix=/usr/local/php-5.6.36 \
–enable-fpm \
–with-fpm-user=www \
–with-fpm-group=www \
–with-mysql=/usr/local/mysql \
–with-mysqli=mysqlnd \
–with-pdo-mysql=mysqlnd \
–with-iconv-dir=/usr/local/libiconv \
–with-freetype-dir \
–with-jpeg-dir \
–with-png-dir \
–with-zlib \
–with-libxml-dir=/usr \
–enable-xml \
–enable-bcmath \
–enable-shmop \
–enable-sysvsem \
–enable-inline-optimization \
–with-curl \
–enable-mbregex \
–enable-mbstring \
–with-mcrypt \
–enable-ftp \
–with-gd \
–enable-gd-native-ttf \
–with-openssl \
–with-mhash \
–enable-pcntl \
–enable-sockets \
–with-xmlrpc \
–enable-zip \
–enable-soap \
–disable-fileinfo \
–enable-opcache \
–enable-intl \
–enable-short-tags \
–with-xsl
[root@localhost ~]# cd /usr/src/
[root@localhost src]# tar -zxf php-5.6.36.tar.gz
[root@localhost src]# cd php-5.6.36
[root@localhost php-5.6.36]# ./configure \
> --prefix=/usr/local/php-5.6.36 \
> --enable-fpm \
> --with-fpm-user=www \
> --with-fpm-group=www \
> --with-mysql=/usr/local/mysql \
> --with-mysqli=mysqlnd \
> --with-pdo-mysql=mysqlnd \
> --with-iconv-dir=/usr/local/libiconv \
> --with-freetype-dir \
> --with-jpeg-dir \
> --with-png-dir \
> --with-zlib \
> --with-libxml-dir=/usr \
> --enable-xml \
> --enable-bcmath \
> --enable-shmop \
> --enable-sysvsem \
> --enable-inline-optimization \
> --with-curl \
> --enable-mbregex \
> --enable-mbstring \
> --with-mcrypt \
> --enable-ftp \
> --with-gd \
> --enable-gd-native-ttf \
> --with-openssl \
> --with-mhash \
> --enable-pcntl \
> --enable-sockets \
> --with-xmlrpc \
> --enable-zip \
> --enable-soap \
> --disable-fileinfo \
> --enable-opcache \
> --enable-intl \
> --enable-short-tags \
> --with-xsl
checking for grep that handles long lines and -e... /usr/bin/grep
checking for egrep... /usr/bin/grep -E
......此处省略......
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
creating libtool
appending configuration tag "CXX" to libtool
checking for ld used by g++... /usr/bin/ld -m elf_x86_64
checking if the linker (/usr/bin/ld -m elf_x86_64) is GNU ld... yes
checking whether the g++ linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking for g++ option to produce PIC... -fPIC
checking if g++ PIC flag -fPIC works... yes
checking if g++ static flag -static works... no
checking if g++ supports -c -o file.o... yes
checking whether the g++ linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking dynamic linker characteristics... GNU/Linux ld.so
(cached) (cached) checking how to hardcode library paths into programs... immediate
Generating files
configure: creating ./config.status
creating main/internal_functions.c
creating main/internal_functions_cli.c
+--------------------------------------------------------------------+
| License: |
| This software is subject to the PHP License, available in this |
| distribution in the file LICENSE. By continuing this installation |
| process, you are bound by the terms of this license agreement. |
| If you do not agree with the terms of this license, you must abort |
| the installation process at this point. |
+--------------------------------------------------------------------+
Thank you for using PHP.
config.status: creating php5.spec
config.status: creating main/build-defs.h
config.status: creating scripts/phpize
config.status: creating scripts/man1/phpize.1
config.status: creating scripts/php-config
config.status: creating scripts/man1/php-config.1
config.status: creating sapi/cli/php.1
config.status: creating sapi/fpm/php-fpm.conf
config.status: creating sapi/fpm/init.d.php-fpm
config.status: creating sapi/fpm/php-fpm.service
config.status: creating sapi/fpm/php-fpm.8
config.status: creating sapi/fpm/status.html
config.status: creating sapi/cgi/php-cgi.1
config.status: creating ext/phar/phar.1
config.status: creating ext/phar/phar.phar.1
config.status: creating main/php_config.h
config.status: executing default commands5、开始编译及安装
[root@localhost php-5.6.36]# make && make install
/bin/sh /usr/src/php-5.6.36/libtool --silent --preserve-dup-deps --mode=compile cc -Iext/opcache/ -I/usr/src/php-5.6.36/ext/opcache/ -DPHP_ATOM_INC -I/usr/src/php-5.6.36/include -I/usr/src/php-5.6.36/main -I/usr/src/php-5.6.36 -I/usr/src/php-5.6.36/ext/date/lib -I/usr/src/php-5.6.36/ext/ereg/regex -I/usr/include/libxml2 -I/usr/include/freetype2 -I/usr/src/php-5.6.36/ext/mbstring/oniguruma -I/usr/src/php-5.6.36/ext/mbstring/libmbfl -I/usr/src/php-5.6.36/ext/mbstring/libmbfl/mbfl -I/usr/local/mysql/include -I/usr/src/php-5.6.36/ext/sqlite3/libsqlite -I/usr/src/php-5.6.36/ext/zip/lib -I/usr/src/php-5.6.36/TSRM -I/usr/src/php-5.6.36/Zend -I/usr/include -g -O2 -fvisibility=hidden -c /usr/src/php-5.6.36/ext/opcache/ZendAccelerator.c -o ext/opcache/ZendAccelerator.lo
/usr/src/php-5.6.36/ext/opcache/ZendAccelerator.c: In function ‘accel_use_shm_interned_strings’:
/usr/src/php-5.6.36/ext/opcache/ZendAccelerator.c:397:28: warning: assignment discards ‘const’ qualifier from pointer target type [enabled by default]
CG(interned_empty_string) = accel_new_interned_string("", sizeof(""), 0 TSRMLS_CC);
^
......此处省略......
/bin/sh /usr/src/php-5.6.36/libtool --silent --preserve-dup-deps --mode=compile cc -Iext/standard/ -I/usr/src/php-5.6.36/ext/standard/ -DPHP_ATOM_INC -I/usr/src/php-5.6.36/include -I/usr/src/php-5.6.36/main -I/usr/src/php-5.6.36 -I/usr/src/php-5.6.36/ext/date/lib -I/usr/src/php-5.6.36/ext/ereg/regex -I/usr/include/libxml2 -I/usr/include/freetype2 -I/usr/src/php-5.6.36/ext/mbstring/oniguruma -I/usr/src/php-5.6.36/ext/mbstring/libmbfl -I/usr/src/php-5.6.36/ext/mbstring/libmbfl/mbfl -I/usr/local/mysql/include -I/usr/src/php-5.6.36/ext/sqlite3/libsqlite -I/usr/src/php-5.6.36/ext/zip/lib -I/usr/src/php-5.6.36/TSRM -I/usr/src/php-5.6.36/Zend -I/usr/include -g -O2 -fvisibility=hidden -c /usr/src/php-5.6.36/ext/standard/scanf.c -o ext/standard/scanf.lo
......此处省略......
Zend/zend_virtual_cwd.lo Zend/zend_ast.lo Zend/zend_objects.lo Zend/zend_object_handlers.lo Zend/zend_objects_API.lo Zend/zend_default_classes.lo Zend/zend_execute.lo main/internal_functions_cli.lo sapi/cgi/cgi_main.lo sapi/cgi/fastcgi.lo -lcrypt -lz -lexslt -lresolv -lcrypt -lrt -lmysqlclient -lmcrypt -lstdc++ -lpng -lz -ljpeg -lcurl -lz -lrt -lm -ldl -lnsl -lxml2 -lz -lm -ldl -lssl -lcrypto -lcurl -lxml2 -lz -lm -ldl -lssl -lcrypto -lfreetype -ldl -lm -licui18n -licuuc -licudata -ldl -lm -licuio -lxml2 -lz -lm -ldl -lxml2 -lz -lm -ldl -lcrypt -lxml2 -lz -lm -ldl -lxml2 -lz -lm -ldl -lxml2 -lz -lm -ldl -lxml2 -lz -lm -ldl -lxslt -lxml2 -lz -ldl -lm -lssl -lcrypto -lcrypt -o sapi/cgi/php-cgi
Generating phar.php
Generating phar.phar
PEAR package PHP_Archive not installed: generated phar will require PHP's phar extension be enabled.
clicommand.inc
directorytreeiterator.inc
invertedregexiterator.inc
directorygraphiterator.inc
pharcommand.inc
phar.inc
Build complete.
Don't forget to run 'make test'.
Installing shared extensions: /usr/local/php-5.6.36/lib/php/extensions/no-debug-non-zts-20131226/
Installing PHP CLI binary: /usr/local/php-5.6.36/bin/
Installing PHP CLI man page: /usr/local/php-5.6.36/php/man/man1/
Installing PHP FPM binary: /usr/local/php-5.6.36/sbin/
Installing PHP FPM config: /usr/local/php-5.6.36/etc/
Installing PHP FPM man page: /usr/local/php-5.6.36/php/man/man8/
Installing PHP FPM status page: /usr/local/php-5.6.36/php/php/fpm/
Installing PHP CGI binary: /usr/local/php-5.6.36/bin/
Installing PHP CGI man page: /usr/local/php-5.6.36/php/man/man1/
Installing build environment: /usr/local/php-5.6.36/lib/php/build/
Installing header files: /usr/local/php-5.6.36/include/php/
Installing helper programs: /usr/local/php-5.6.36/bin/
program: phpize
program: php-config
Installing man pages: /usr/local/php-5.6.36/php/man/man1/
page: phpize.1
page: php-config.1
Installing PEAR environment: /usr/local/php-5.6.36/lib/php/
[PEAR] Archive_Tar - installed: 1.4.3
[PEAR] Console_Getopt - installed: 1.4.1
[PEAR] Structures_Graph- installed: 1.1.1
[PEAR] XML_Util - installed: 1.4.2
[PEAR] PEAR - installed: 1.10.5
Wrote PEAR system config file at: /usr/local/php-5.6.36/etc/pear.conf
You may want to add: /usr/local/php-5.6.36/lib/php to your php.ini include_path
/usr/src/php-5.6.36/build/shtool install -c ext/phar/phar.phar /usr/local/php-5.6.36/bin
ln -s -f phar.phar /usr/local/php-5.6.36/bin/phar
Installing PDO headers: /usr/local/php-5.6.36/include/php/ext/pdo/6、创建软链接
[root@localhost php-5.6.36]# ln -s /usr/local/php-5.6.36/ /usr/local/php7、拷贝并改名PHP配置文件
[root@localhost php-5.6.36]# cp /usr/src/php-5.6.36/php.ini-production /usr/local/php/lib/php.ini8、拷贝并改名PHP-FPM配置文件
[root@localhost php-5.6.36]# cp /usr/local/php/etc/php-fpm.conf.default /usr/local/php/etc/php-fpm.conf9、编辑PHP-FPM配置文件（vim /usr/local/php/etc/php-fpm.conf）
把以下这段
;pid = run/php-fpm.pid去掉注释并保存
pid = run/php-fpm.pid10、拷贝PHP-FPM服务文件至启动目录并添加执行权限
[root@localhost php-5.6.36]# cp /usr/src/php-5.6.36/sapi/fpm/init.d.php-fpm /etc/rc.d/init.d/php-fpm && chmod +x /etc/rc.d/init.d/php-fpm11、将PHP-FPM服务配置开机启动并检查
[root@localhost php-5.6.36]# chkconfig php-fpm on
[root@localhost php-5.6.36]# chkconfig --list php-fpm
Note: This output shows SysV services only and does not include native
systemd services. SysV configuration data might be overridden by native
systemd configuration.
If you want to list systemd services use 'systemctl list-unit-files'.
To see services enabled on particular target use
'systemctl list-dependencies [target]'.
php-fpm 0:off 1:off 2:on 3:on 4:on 5:on 6:off12、启动PHP-FPM服务并验证
[root@localhost ~]# systemctl start php-fpm.service[root@localhost ~]# systemctl status php-fpm.service && ss -lnat
● php-fpm.service - LSB: starts php-fpm
Loaded: loaded (/etc/rc.d/init.d/php-fpm; bad; vendor preset: disabled)
Active: active (running) since Wed 2018-05-09 15:45:44 CST; 12min ago
Docs: man:systemd-sysv-generator(8)
Process: 1328 ExecStop=/etc/rc.d/init.d/php-fpm stop (code=exited, status=0/SUCCESS)
Process: 1343 ExecStart=/etc/rc.d/init.d/php-fpm start (code=exited, status=0/SUCCESS)
CGroup: /system.slice/php-fpm.service
├─1345 php-fpm: master process (/usr/local/php-5.6.36/etc/php-fpm.conf)
├─1346 php-fpm: pool www
└─1347 php-fpm: pool www
May 09 15:45:44 localhost.localdomain systemd[1]: Starting LSB: starts php-fpm...
May 09 15:45:44 localhost.localdomain php-fpm[1343]: Starting php-fpm done
May 09 15:45:44 localhost.localdomain systemd[1]: Started LSB: starts php-fpm.
State Recv-Q Send-Q Local Address:Port Peer Address:Port
LISTEN 0 128 127.0.0.1:9000 *:*
LISTEN 0 128 *:80 *:*
LISTEN 0 128 *:22 *:*
ESTAB 0 0 172.16.0.209:22 172.16.4.143:58911
LISTEN 0 80 :::3306 :::*
LISTEN 0 128 :::22 :::*13、PHP和Nginx整合：编辑Nginx主配置文件（/usr/local/nginx/conf/nginx.conf）
把下面这段代码
#location ~ \.php$ {
# root html;
# fastcgi_pass 127.0.0.1:9000;
# fastcgi_index index.php;
# fastcgi_param SCRIPT_FILENAME /scripts$fastcgi_script_name;
# include fastcgi_params;
#}去掉注释并修改为
location ~ \.php$ {
root html;
fastcgi_pass 127.0.0.1:9000;
fastcgi_index index.php;
fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name;
include fastcgi_params;
}14、检查Nginx配置文件是否有误并重载Nginx配置文件
[root@localhost conf]# /usr/local/nginx/sbin/nginx -t
nginx: the configuration file /usr/local/nginx-1.12.2/conf/nginx.conf syntax is ok
nginx: configuration file /usr/local/nginx-1.12.2/conf/nginx.conf test is successful
[root@localhost conf]# /usr/local/nginx/sbin/nginx -s reload15、上传phpinfo文件验证
[v_act]PHP-FPM相关管理命令[/v_act]
systemctl status php-fpm.service #查看PHP-FPM运行状态
systemctl start php-fpm.service #启动PHP-FPM服务
systemctl stop php-fpm.service #停止PHP-FPM服务
systemctl restart php-fpm.service #重启PHP-FPM服务
正文完
